12,1 գունավոր TFT LCD սենսորային էկրան
8 ալիքաձև կորերի ցուցադրումից մինչև 12-կանալային ԷՍԳ վերլուծություն
Օգտակար հաշվարկ
(Hemodynamic, Դեղորայքի չափաբաժին , Oxygenation, Օդափոխություն)
Կարդիոստիմուլյատորի հայտնաբերում
ST և առիթմիայի վերլուծություն
OxyCRGs մոնիտոր
Լարային/անլար CMS support HL7 protocol to HIS
SpO2 զարկերակային տոնի փոփոխում
MEWS (Modified Early Warning Score)
Գրաֆիկական և աղյուսակային զննման հնարավորություն (120 ժամ)
Վերալիցքավորվող Lithium-Ion մարտկոց (2600 mAh)
Display
12.1” TFT (touch screen optional)
Resolution: 800 x 600
Number of traces: 8 waveforms
ECG
Lead type: 3-lead, 5-lead, 12-lead
ECG waveform: 2 channels, 7 channels,
12 channels
Display sensitivity: 2.5 mm/mV (×0.25),
5 mm/mV (×0.5), 10 mm/mV (×1.0),
20 mm/mV (×2.0)
Wave sweep speed: 6.25 mm/s, 12.5 mm/s,
25 mm/s, 50 mm/s
Bandwidth
Diagnostic mode: 0.05 Hz~100 Hz
Monitor mode: 0.5 Hz~40 Hz
Surgery mode: 1Hz~20Hz
Strong filter mode: 5 Hz~20 Hz
CMRR >100 dB
Notch: 50/60 Hz notch filter can be set to
on or off
Differential input impedance >5MΩ
Electrode polarization voltage range: ±400 mV
Baseline recovery time <3s after defibrillation
(in monitor and surgery mode)
Calibration signal: 1mV (peak – peak),
accuracy ±3%
RESP
Measurement method: Thoracic electrical
bioimpedance
Rate: 0 – 150 bpm
Measuring lead: Lead I, II
Wave gain: ×0.25, ×0.5, ×1, ×2
Respiratory impedance range: 0.5-5Ω
Baseline impedance: 500-4000Ω
Gain: 10 grades
Scan speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s
Pulse Rate
Range: 30~254 bpm
Resolution: 1bpm
Accuracy: ±2bpm (non-motion)
±5bpm (motion)
Refreshing rate: 1s
TEMP
Accuracy: ±0.1 °C or ±0.2 °C °F (without probe)
Measurement range: 5~50 °C (41~122 °F)
Channel: Two channels
Resolution: 0.1 °C
Parameters: T1,T2 and TD
www.axcentmedical.com
Technical Specifications
12.1”color TFT LCD screen, wide and flat screen design,ecnomic and reliable
Configuration: ECG+SpO2+NIBP+2TEMP+PR+RESP, Li-ion battery
Optional: Touch-Screen, 12-lead ECG, Masimo SpO2, 2/4/6 IBP, C.O., EtCO2, Multi-Gas, BIS, NMT,
VGA, Thermal Recorder, Wired/Wireless CMS
Technical Specifications
NIBP
Measurement method: Automatic oscillometric method
Operating mode: Manual, automatic,
continuous
Measurement unit: mmHg/kPa selectable
Typical measurement time: 20~40 s
Measurement type: Systolic, Diastolic, Mean
Measurement range (mmHg)
Range of Systolic pressure: Adult 40-270
Pediatric 40-200
Neonatal 40-135
Range of Diastolic pressure: Adult 10-210
Pediatric 10-150
Neonatal 10-95
Range of Mean pressure: Adult 20-230
Pediatric 20-165
Neonatal 20-105
Measurement accuracy
Maximum average error: ±5 mmHg
Maximum standard deviation: 8 mmHg
Resolution: 1 mmHg
Interval: 1, 3, 4, 5, 10, 15, 30, 60, 90, 120, 180,
240, 480 minutes
Overpressure protection: Software and
hardware, double safety protection
Cuff pressure range: 0-280 mmHg
SpO2
Measurement range: 0-100%
Resolution: 1%
Accuracy: ±2% (70-100%, Adult/Pediatric);
±3% (70-100%, Neonate);
0-69%, unspecified
Refreshing Rate: 1s
Masimo SET® SpO2 (Optional)
Measurement range: 0-100%
Resolution: 1%
Accuracy: ±2% (70-100%, Adult/Pediatric,
non-motion, low prefusion);
±3% (70-100%, Neonate,
non-motion);
±3% (70-100%, motion);
0-69%, unspecified
Refreshing Rate: 1s
Recorder (Optional)
Built-in, Thermal dot array
Horizontal resolution: 16 dots/mm (25 mm/s
paper speed)
Vertical resolution: 8 dots/mm
Paper speed: 25 mm/s, 50 mm/s
Number of waveform channels: 3
Operation Environment
Power: AC 100-250V, 50/60Hz
Temperature: 5-40 °C
Humidity: <80%
Patient Range: Adult, Pediatric, Neonate
Battery backup: Standard 2-3 hrs (2.600 mAh),
optional 3-5 hrs (4.800 mAh)
